Knife gate valves must be inspected before installation, and sealing surface of the cavity and other parts, does not allow dirt or sand attached.

A pressure balanced valve, required by building codes in some municipalities, provides water at nearly constant temperature to a shower or bathtub, despite pressure fluctuations in either the hot or c

Besides lubricating the moving parts of the valve, valve oil provides corrosion protection to the bare metal of the inner valve.

The gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid.

As a standard, the valves are manufactured in Peco bolted body designs, where the joint between the body and the connector is bolted.

Exterior

(8) Remove the other side of the seat 2 and O ring 63. (9) check valve (1), the ball 3 and the valve body 26 and, if damage to be repaired, the parts clean water. (10) lubricate the valve seat s

These standards include the copper content 57 -60%, zinc