Gate Valve Series

Product drawing»

Structural drawing»

You are here: News > News Detail

Stainless steel valves in the new size

2011-01-17

Applications include deionized water, vegetable oil, fuel oil, gas, steam, solvents, cryogenics and oxygen. The gate valves are not stuffing construction with continuous duty coils for all AC and DC voltages success or failure of the 150 - and 300-pound bracket.

Omega-SV-1200 of miniature solenoid valves are suitable for applications in analytical technology and reliable handling difficult liquids such as acids, alkalis, pharmaceuticals and biotechnology in the fluid process.

Thermal insulation of the reader and provides accurate measurement for liquid applications. Other features include universal functions, size, and a fast and easy connection to reduce the electrical installation. An LED indicator provides a safe and convenient control.

Each valve is manufactured and tested in the following quality assurance standards, where production operations under the supervision of our dedicated and experienced.

Many funding streams are composed of a single vertical line followed by a single horizontal line. If the horizontal line has a considerable length, the speed is equal to or greater than the speed necessary to monitor the saltation phase dilute flow in the pipeline. A significant reduction in the rate of flow is necessary to dilute phase can be achieved by maintaining the horizontal line should slope downward as in Figure 1. A low angle of only 15 degrees is enough to significantly reduce the rate of force to prevent the release on line.

Since it is difficult to maintain solid dilute phase mode in a horizontal line, as in a vertical line, the speed is greater than the saltation velocity choke. The report of the mutation rate of speed of suffocation in the range of 3 to 6 This means that the minimum system requirements for speed in a system of horizontal and vertical lines in promoting the overall speed of saltation. Many people try to reduce the diameter to increase the horizontal lines at the gas velocity and gas volumetric requirements of the system reduces to a minimum. However, reducing the diameter of the horizontal lines also increases the mass flow of solids in the pipeline, which means that the mutation rate increases and usually results in no net

Shanghai MeiYan Yi Pump & Valve Co., Ltd.
MeiYan Yi gate valve Contact MeiYan Yi
Shanghai Enine Pump & Valve Co., Ltd.
Enine gate valve Contact Enine
Shanghai Saitai Pump & Valve CO., Lid.
Saitai gate valve Contact Saitai
Shanghai Fengqi Industrial Development Co., Ltd.
FengQi gate valve Contact FengQi