Forged steel gate valve body cap connection design in three forms.

Knife gate valves must be inspected before installation, and sealing surface of the cavity and other parts, does not allow dirt or sand attached.

A pressure balanced valve, required by building codes in some municipalities, provides water at nearly constant temperature to a shower or bathtub, despite pressure fluctuations in either the hot or c

Besides lubricating the moving parts of the valve, valve oil provides corrosion protection to the bare metal of the inner valve.

The gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid.

As a standard, the valves are manufactured in Peco bolted body designs, where the joint between the body and the connector is bolted.

Exterior

(8) Remove the other side of the seat 2 and O ring 63. (9) check valve (1), the ball 3 and the valve body 26 and, if damage to be repaired, the parts clean water. (10) lubricate the valve seat s